The most irritating thing about a robot vacuum is getting stuck. Robot vacuum cleaners often get stuck under your sofa when cleaning your drawing room or living room. But how to keep robot vacuum from getting stuck under furniture?
Remember that stuck only happens if your sofa is lower at home. Typically, a robot vacuum is not placed under a high sofa. If your furniture is high, the robot cleaner can easily pass under it.
How to Keep Robot Vacuum From Getting Stuck Under Furniture
Although these methods work with a wide range of robotic devices, some may require higher advanced technologies. Prepare to inspect which actions are the simplest for you.
Use Furniture Lifters
Your robot vacuum will get trapped trying to move beneath low-elevation furniture. Using furniture climbers beneath the base of your furnishings is the simplest and most cost-effective solution to protect robot vacuums from getting caught below the slab.
Furniture lifters come in various sizes from 1” to 8” and you can buy them at a low cost from any local hardware store. Depending on your tastes, they’re also accessible in various materials, including wood, rubber, and metal. Such lifters make it easier for the robot to vacuum, clean up, and return.
Use of Bumper Extenders
A bumper extender is a cone-structured rubber that may be pasted or fastened onto the front edge of Roomba or another Robo vacuum bumper.
When this DIY hack is implemented, these bumper extenders will run into the furnishings foundation. The robot vacuum must reverse course instead of attempting to travel beneath furniture and become trapped.
Use of 3M Hooks
3M hooks are also a way to protect your robot vacuum from getting caught beneath your furniture. Two 3M clips, each facing backward, should be affixed to the front of your robot vacuum.
These hooks will collide with your furniture if your robot vacuum approaches low elevated furniture, such as a bed, couch, or sofa. The robot vacuum adjusts its direction.
Use of Pool Noodles
If your robot vacuum has to clean an area like carpets with high piles and soft rugs, your robot vacuum must get stuck on those carpets. That is why it’s a good idea to keep your robot vacuum away from your carpet and rugs.
The use of pool noodles can make this done. Create a gap on one face of the pool noodle and glue it to the carpet’s side.
Glue together many pool noodles to fill the whole carpeting and rug. It will act as a deterrent to the robot vacuum. When your robot vacuum collides with a pool noodle, it will pull up and turn in an angled manner.
Buying Elevated Furniture
Buying elevated furniture is one technique to protect your robot vacuum from getting trapped. Use this procedure when you need to purchase new furniture or exchange the old one. The essential principle is the same – give it enough room to move about, so it doesn’t become trapped.
Simply restricting your robot’s access is one approach to prevent it from getting trapped. You can accomplish it either physically or online.
Physically, you can cover the gap between the furnishings and the floor with cardboard or another barrier. Instead of getting stuck under the wall, the robot vacuum will collide with it and change course.
Virtually, using a phone app, you may limit the furniture range. Access the blueprint of your house that the robot vacuum has created and sketch the region where you wish your robot vacuum to stop going.
Get rid of heavy mats and carpets.
If your carpet or mat has tassels or stringy trims, become trapped on these thick pile carpets. The most straightforward approach is to eliminate them before the robot vacuum begins cleaning or sealing the area with a physical wall or a mobile application. Unless you don’t desire to relocate your carpets or mats, you may use pool noodles.
Locate the dock in a prominent location
The dock is referred to as a Homebase by robot vacuum makers. It guides and leads the robot vacuum around the house via signals. That’s why the Homebase should be kept in a central area.
If the robot vacuum travels too far enough from the Homebase, You will lose the signs, and it may become stuck. There should be sufficient space surrounding the Homebase to make docking easier.
Set The Space For Your Robot Vacuum
Another way to avoid robot vacuum becoming trapped is to organize the cleaning space. It is particularly true of the dining room table and chairs.
Although if you have four seats at your dining table, your machine will get a tough time maneuvering around 20 wooden legs. To protect your robot vacuum from becoming caught beneath the dining table, take up the chairs and place them upside down on the dining table.
Keep the Lights On
Because optical sensors detect objects using light, they perform best when light is present. Keeping a minimum amount of light during the cleaning process is appropriate if nobody is at the house.
Robot vacuum related article at pickthevacuum –
The 8 Best Robot Vacuum for Luxury Vinyl Plank Floors
The Top 5 Robot Vacuum For Tile Floors
The 5 Best Vacuum and Mop for Hardwood Floors