Best Shop Vac: 6 Wet/Dry Vacs for Every Job
A shop vac is the vacuum you use when a household machine would choke: sawdust, drywall dust, spilled water, wet...
A shop vac is the vacuum you use when a household machine would choke: sawdust, drywall dust, spilled water, wet leaves, and garage grit. The right one depends on the job. A large drum on a cart suits garages and renovation work, a compact vac suits cars and small spills, and a dust extractor suits fine dust from power tools.
We compared wet/dry vacs from 2 to 16 gallons on tank size, published power figures, hose diameter, filtration, mobility, and warranty, using manufacturer specifications. Each pick is rated with our PTV Score.
Safety note: Wet/dry vacs combine water and electricity. Follow the manual for wet pickup, including the filter and float requirements, and unplug the vac before emptying it. Never vacuum flammable or combustible liquids, hot ashes, or anything the manual excludes. For cordless models, use only the manufacturer’s batteries and chargers.
Our Top Picks
| Best for | Product | PTV Score About PTV ScorePTV Score (out of 10) is our editorial rating from five weighted criteria, based on manufacturer specifications. See how we score. | |
|---|---|---|---|
| Best overall |
RIDGID 1610RV
|
8.3/10 | Check Price |
| Best compact |
RIDGID 4000RV
|
8.0/10 | Check Price |
| Best value large vac |
Craftsman CMXEVBE17595
|
7.8/10 | Check Price |
| Best for fine dust |
DEWALT DWV010
|
7.5/10 | Check Price |
| Best stainless mid-size |
Shop-Vac 5989305
|
7.5/10 | Check Price |
| Best cordless |
Milwaukee M18 0880-20
|
7.5/10 | Check Price |
The Picks in Detail
RIDGID 1610RV
Why it made the list: The 1610RV pairs a 16-gallon stainless steel drum with a 6.5 peak HP motor, a cart with large rear wheels, and 2-1/2 in accessories for big debris. RIDGID backs its U.S. wet/dry vacs with a full lifetime warranty against defects, which is rare in this category.
Key specs: 16 gal stainless wet/dry vac with cart. 6.5 peak HP. 20 ft cord. Locking hose and 2-1/2 in accessories. Drain and blower port (listing). Full lifetime warranty (RIDGID U.S.).
Skip it if: you have little storage space; the 4000RV is much smaller.
Pros
- Large stainless drum
- Cart rolls over thresholds and up steps
- Lifetime warranty
Cons
- RIDGID’s pages list different airflow figures, so we do not quote one
- Bulky to store
- Overkill for small spills
RIDGID 4000RV
Why it made the list: The 4000RV packs 92 CFM of published airflow and a wide 1-7/8 in locking hose into a 4-gallon drum that stands about 15 in tall. It is the vac to keep in the car or laundry room, and it carries the same full lifetime warranty in the U.S.
Key specs: 4 gal corded wet/dry vac. 5.0 peak HP. 92 CFM (RIDGID). 1-7/8 in x 8 ft locking hose. 20 ft cord. Full lifetime warranty (RIDGID U.S.).
Skip it if: you clean up water or debris by the bucket.
Pros
- Strong airflow for its size
- Wide hose
- Stores on a shelf
Cons
- Small tank for water
- Loud
- No cart or wheels for heavy loads
Craftsman CMXEVBE17595
Why it made the list: Craftsman’s 16-gallon model matches the RIDGID’s drum size and 6.5 peak HP rating in a poly drum. Its listing gives a 2-1/2 in Dual-Flex hose that swivels at both ends to resist kinking, two extension wands, a rear blower port, an oversized drain, and a 3-year limited warranty.
Key specs: 16 gal poly wet/dry vac. 6.5 peak HP. 2-1/2 in x 7 ft Dual-Flex hose. Blower port. Oversized drain. Utility, car, and wet nozzles. 3-year limited warranty (listing).
Skip it if: you want the longest warranty.
Pros
- Large capacity
- Kink-resistant hose
- Drain for water jobs
Cons
- Poly drum instead of stainless
- Shorter warranty than RIDGID
- No published airflow figure
DEWALT DWV010
Why it made the list: The DWV010 is a dust extractor rather than a general shop vac. DEWALT rates it at about 150 CFM from a 15-amp motor, and it meets EPA RRP requirements when used with DEWALT’s DWV9320 or DWV9330 filters, which matters for sanding and cutting work.
Key specs: 8 gal dust extractor. 15 amps. About 150 CFM (DEWALT). EPA RRP compliant with DWV9320 or DWV9330 filter. 21 lb. 3-year limited warranty plus 1 year free service (DEWALT).
Skip it if: you mostly clean wet messes or the car.
Pros
- Built for fine tool dust
- RRP-compliant filter option
- Service coverage
Cons
- Highest cost here
- Not designed for large water cleanups
- Smaller drum than the 16-gallon vacs
Shop-Vac 5989305
Why it made the list: A 5-gallon stainless steel tank is a good middle size for basements and workshops. Shop-Vac’s listing gives a 4.5 peak HP motor, a 7 ft hose, a blower port, and a cartridge filter with a foam sleeve.
Key specs: 5 gal stainless wet/dry vac. 4.5 peak HP. 7 ft x 1-1/4 in hose. Blower. Cartridge filter and foam sleeve. Specs per Shop-Vac’s listing.
Skip it if: you vacuum chunky debris like wood chips.
Pros
- Stainless tank
- Middle size
- Blower function
Cons
- Narrow 1-1/4 in hose clogs sooner
- Specs from the listing only
- Warranty not confirmed
Milwaukee M18 0880-20
Why it made the list: For jobsites and garages without a handy outlet, the 0880-20 runs on Milwaukee’s M18 batteries. Milwaukee lists 45 CFM, 32 in of water lift, more than 30 minutes with an M18 HIGH DEMAND 9.0 battery, a HEPA filter, and a 5-year warranty.
Key specs: 2 gal cordless wet/dry vac. M18. 45 CFM, 32 in water lift. 30+ minutes with HIGH DEMAND 9.0 battery. HEPA filter. Blower port. 10.1 lb. 5-year warranty. Tool only (Milwaukee).
Skip it if: you do not already own M18 batteries.
Pros
- No cord
- HEPA filter
- Long warranty
Cons
- Battery and charger sold separately
- Small tank
- Less airflow than corded vacs
Shop Vacs Compared
| Model | Tank | Power figure | Hose | Power source | Warranty |
|---|---|---|---|---|---|
| RIDGID 1610RV | 16 gal | 6.5 peak HP | Locking, 2-1/2 in tools | Corded | Lifetime (U.S.) |
| RIDGID 4000RV | 4 gal | 92 CFM | 1-7/8 in x 8 ft | Corded | Lifetime (U.S.) |
| Craftsman CMXEVBE17595 | 16 gal | 6.5 peak HP | 2-1/2 in x 7 ft | Corded | 3 years |
| DEWALT DWV010 | 8 gal | About 150 CFM | Not stated | Corded | 3 years |
| Shop-Vac 5989305 | 5 gal | 4.5 peak HP | 1-1/4 in x 7 ft | Corded | Not confirmed |
| Milwaukee 0880-20 | 2 gal | 45 CFM | Not stated | M18 battery | 5 years |
How We Picked
We did not run our own trials. We researched tank size, published airflow and motor ratings, hose diameter, filtration, mobility, and warranty, covering a range of sizes, and scored each model with the five weighted criteria on our How We Review page.
How to Choose a Shop Vac
- Size: 2 to 5 gallons for cars and small spills, 12 to 16 gallons for garages, basements, and renovation.
- Hose: 2-1/2 in hoses suit big debris; 1-1/4 in hoses suit cars and tight spaces. Some vacs accept both.
- Filtration: use a fine dust or HEPA-rated filter, or a collection bag, for drywall and sanding dust.
- Power ratings: peak HP is a rough guide. Airflow (CFM) and water lift tell you more when published.
- Drain: a drain port makes emptying a large drum of water much easier.
Related Guides
FAQ
What size shop vac do I need?
For a garage or workshop, 12 to 16 gallons. For cars and household spills, 2 to 5 gallons is easier to store and carry.
Can I use a shop vac for drywall dust?
Yes, with a fine dust filter or bag. A dust extractor such as the DEWALT DWV010 is designed for it.
Is stainless steel better than plastic?
Stainless resists dents and looks better over time. Poly drums are lighter and do not rust.
Final Thoughts
The RIDGID 1610RV is the best shop vac for most garages and workshops. The RIDGID 4000RV is the best compact choice, the Craftsman CMXEVBE17595 is the value large vac, the DEWALT DWV010 handles fine dust, the Shop-Vac 5989305 is a solid stainless mid-size, and the Milwaukee 0880-20 is the pick for cordless work. See our shop vacuums category.

RIDGID 4000RV
Craftsman CMXEVBE17595
Milwaukee M18 0880-20