We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

How to Clean a Vacuum Brushroll: Step by Step

Hair, thread, and carpet fibers wind around a vacuum’s brushroll over time. A tangled brushroll spins slower, picks up less,...

Hair, thread, and carpet fibers wind around a vacuum’s brushroll over time. A tangled brushroll spins slower, picks up less, and can strain the belt or motor. Cleaning it takes a few minutes and is one of the easiest ways to keep a vacuum working well. Your vacuum’s manual comes first, since brushroll access differs by model.

Before you start: Unplug corded vacuums, and remove or switch off the battery on cordless models. Brushrolls can start suddenly if the power is on. Use scissors or a seam ripper carefully, cutting away from your hands.

What You Need

  • Scissors or a seam ripper
  • A coin or screwdriver, if your brushroll cover uses screws or clips
  • A small brush or cloth
  • Your vacuum’s manual

Step by Step

  1. Turn the vacuum over on a protected surface so you can see the floor head.
  2. Remove the brushroll if your model allows it. Many cordless sticks and newer uprights have a release latch or end cap. On others, remove the bottom plate first.
  3. Cut wrapped hair along the groove that runs the length of many brushrolls, or lengthwise across the wraps. Do not cut the bristles.
  4. Pull the cut hair away and remove thread from the brushroll ends, where it often collects around the bearings.
  5. Wipe the housing and clear debris from the air path behind the brushroll.
  6. Check the belt on belt-driven models. Replace it if it is stretched, cracked, or slipping.
  7. Reinstall the brushroll and cover, and make sure it turns freely by hand before powering on.

Washing a Brushroll

Some soft rollers and brushrolls can be rinsed, but many cannot, because they contain bearings or electrical parts. Wash a brushroll only if your manual says it is washable, and let it dry completely before reinstalling.

Self-Cleaning and Anti-Tangle Brushrolls

Many newer vacuums use combs, rubber fins, or cone-shaped brushes designed to reduce hair wrap. These help, but they still need occasional checks, especially at the ends of the brushroll. If hair wrap is a constant problem, see our picks in the best cordless vacuums for pet hair.

How Often to Clean It

Check the brushroll whenever pickup seems weaker or you hear a change in sound. Homes with long hair or pets may need a quick check every week or two. Your manual may list a schedule.

Signs of a Bigger Problem

  • Brushroll does not spin: check for a broken belt, a jam, or a reset button on the floor head.
  • Burning smell: stop using the vacuum and check for a jammed brushroll or slipping belt.
  • Worn bristles: replace the brushroll with the maker’s part when the bristles no longer reach the carpet.

FAQ

Can I use the vacuum with hair on the brushroll?

Yes, but pickup suffers and the belt or motor works harder. Clear it when you notice wraps.

Why does my brushroll stop on hard floors?

Many vacuums stop the brush on bare floors by design, or have a brush on/off switch. Check your manual.

Where can I buy a replacement brushroll?

From the vacuum maker or an authorized parts seller. Match your model number.

About the author

Eric Todd
Eric Todd

Eric Todd writes vacuum and floor-care buying guides for PickTheVacuum. He compares robot, stick, upright, and canister vacuums, carpet cleaners, and hard floor cleaners using manufacturer specifications and published documentation, and explains the trade-offs that matter for different homes and floors.